Will Flameless Taper Candles Fit Your Vintage Candlesticks?

One brass candlestick holds a glowing LED taper while an empty brass holder and another ivory taper sit nearby.

Measure the inside of the candlestick cup and match it to the part of the LED candle that will actually sit in it. A vintage holder can be wider at the rim and taper inward. Measure each holder if you’re putting together a mismatched set.

This post contains affiliate links. As an Amazon Associate I earn from qualifying purchases.

Measure the holder, then check the candle’s base

  1. Measure the opening. With the cup empty, measure across its inside edges. Measuring across the outside of the brass will give you a larger number.
  2. Check the seat and the depth. Look for a lip or taper inside the cup. Measure the width at the place the candle will sit and note how deep it can go before it reaches a stop.
  3. Ask about the part that inserts. A listing’s overall diameter may refer to the widest part of the candle. If your measurement is close, ask for the diameter at the bottom and just above it.

Work through a close fit

For example, the Homemory ivory two-pack specifications list the candles at 9.6 inches tall and 0.78 inch across. A ¾-inch opening is 0.75 inch. If the part of the candle that needs to pass through that opening is 0.78 inch, it won’t fit. Ask for the base measurement if you can’t tell which part was measured. See the Homemory ivory two-pack on Amazon.

Test one on a level table

Seat the candle without forcing it. If it leans or rocks easily, try a better-fitting holder or a compatible insert. Check how you’ll reach the switch or battery compartment and how the full height looks across the table before setting out the rest.

You can bring the measurements in a note on your phone when you’re shopping secondhand. Mark each holder separately if the cups are different.

The featured image is a photo-style illustration.