Does the Audio-Technica AT-LP120XUSB Need Speakers or a Preamp?

Black Audio-Technica AT-LP120XUSB turntable with a black record and raised clear dust cover on a wood console.

The Audio-Technica AT-LP120XUSB has a switchable phono preamp built in. For everyday listening, you still need speakers and a way to power them. Start with the inputs you already have, then match the setting on the back of the turntable.

This guide contains an affiliate link. As an Amazon Associate I earn from qualifying purchases.

Black Audio-Technica AT-LP120XUSB turntable with a black record and raised clear dust cover on a wood console.

Powered speakers with a line input

Set the turntable to LINE so it uses its own preamp. Run the RCA cable to a line-level input on the powered speakers. Check which connector the speakers use. A 3.5 mm input may require an RCA-to-3.5 mm adapter.

Receiver and passive speakers

Connect your passive speakers to a receiver or amplifier. If you’re using its PHONO input, set the turntable to PHONO and follow the manual for the ground wire. If you’re using an AUX or other line-level input, set the turntable to LINE.

When USB matters

USB sends the turntable’s audio to a computer, which is handy for digitizing records. The black wired model shown here is AT-LP120XUSB-BK. Check that model code before ordering, especially if the retailer displays the similarly named Bluetooth model alongside it. It’s fully manual, so plan to cue the tonearm and lift it at the end of a side.

See Audio-Technica’s connection and setup manual.

Related guide How to identify the Interstellar Expanded 4LP soundtrack